Rep 13.3 Envelope Feeder Pwb; Rep 13.4 Retard Roll Assembly - Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

REP 13.3 Envelope Feeder PWB

Parts List on PL 12.2
Removal
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover (REP 13.1).
3. Remove the Top Chute (REP 13.2).
4. Disconnect P/J411, P/J 412, P/J413, and P/J414 from the Feeder PWB
5. Remove the screw that secures the Feeder PWB to the frame
Figure 1 Envelope Feeder PWB
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 13.3, REP 13.4
CAUTION
WARNING
(Figure
(Figure 1).

REP 13.4 Retard Roll Assembly

Parts List on PL 12.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover
3. Remove the Top Chute
4. Carefully pry up on the two hinge pins and remove the Retard Roll Assembly
1).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-104
WARNING
(REP 13.1).
(REP 13.2).
Figure 1 Retard Roll Assembly
(Figure 1).
Initial Issue
DocuPrint N2125