Rep 11.7 Drive Motor; Rep 11.8 Feeder Pwb - Xerox DocuPrint N2025 Service Manual

REP 11.7 Drive Motor

Parts List on PL 11.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the paper tray from the feeder.
2. Remove the Front Cover (REP 11.2).
3. Remove the Left Cover (REP 11.3)
4. Remove the Drive Assembly (REP 11.6).
5. Remove the two screws that secure the Drive Motor to the Drive Assembly (Figure 1).
Remove the motor.
Figure 1 Feeder Drive Motor
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 11.7, REP 11.8
WARNING

REP 11.8 Feeder PWB

Parts List on PL 11.2
Removal
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1. Remove the paper tray from the feeder.
2. Remove the Front Cover (REP 11.2).
3. Remove the Left Cover (REP 11.3)
4. Disconnect P/J13B, P/J133, P/J138, P/J132, and P/J136 from the Feeder PWB (Figure
1).
5. Remove the two screws that secure the PWB to the printer frame (Figure 1). Remove the
PWB.
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-66
CAUTION
WARNING
Figure 1 Feeder PWB
DocuPrint N2025/N2825
Initial Issue