Rep 4.3.1 Sensor Bar - Xerox WorkCentre 7132 Service Documentation

REP 4.3.1 Sensor Bar

Parts List on PL 11.1
Removal
1. Switch off the power and disconnect the Power Cord.
2. Remove the IBT Module. (REP 4.2.2)
3. Prepare to remove the Sensor Bar.
a. Release the harness clamps (2).
b. Disconnect the connectors (2).
c. Remove the screw (1).
Figure 1 Preparing to remove the Sensor Bar
4. Remove the Sensor Bar (PL 11.1).
Repairs/Adjustments
REP 4.3.1
c
Remove the screw
(1)
a
Release the har-
ness clamps (2)
b
Disconnect the con-
nectors (2)
Figure 2 Removing the Sensor Bar
January 2007
4-50
Reversion 4.0
WorkCentre 7132