Rep 12.13 Transport Sensor; Rep 12.14 Face Up Tray Sensor - Xerox DocuPrint N2125 Service Manual

REP 12.13 Transport Sensor

Parts List on PL 13.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly (REP
2. Remove the Duplex Cover (REP 12.3).
3. Disconnect P/J37 from the Duplex PWB
4. Release the four locking tabs that secure the Transport Sensor
5. Remove the Sensor (Figure 1).
Figure 1 Transport Sensor
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
WARNING
12.1).
(Figure 1).
(Figure 1).

REP 12.14 Face Up Tray Sensor

Parts List on PL 13.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly
2. Release the four locking tabs that secure the Face Up Tray Sensor
3. Disconnect P/J361 from the Face Up Tray Sensor
4. Remove the Sensor (Figure
Figure 1 Face Up Tray Sensor
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-101
WARNING
(REP 12.1).
(Figure
(Figure 1).
1).
REP 12.13, REP 12.14
1).
Repair-Adjustment