Rep 11.18 Paper Size Sensor; Rep 11.19 Paper Tray Sensor - Xerox DocuPrint N2025 Service Manual

REP 11.18 Paper Size Sensor

Parts List on PL 11.3
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500 Sheet Feeder (REP 11.1).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (REP 11.2).
4. Remove the Left Cover (REP 11.3).
5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).
6. Remove the Retard Chute (REP 11.13).
7. Remove the Left Tray Guide (REP 11.14).
8. Disconnect P/J139 from the back of the Paper Size Sensor (Figure 1).
9. Release the two locking tabs and remove the sensor (Figure 1).
Figure 1 Paper Size Sensor
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING

REP 11.19 Paper Tray Sensor

Parts List on PL 11.3
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500 Sheet Feeder (REP 11.1).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (REP 11.2).
4. Remove the Left Cover (REP 11.3).
5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).
6. Remove the Retard Chute (REP 11.13).
7. Remove the Left Tray Guide (REP 11.14).
8. Disconnect P/J137 from the back of the Tray Sensor (Figure 1).
9. Release the three locking tabs and remove the sensor (Figure 1).
Figure 1 Paper Tray Sensor
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-73
WARNING
Repair-Adjustment
REP 11.18, REP 11.19