Rep 7.7 Tray 2 Lift Motor; Rep 7.8 Tray 2 Lift Gear - Xerox Phaser 4620 Service Manual

REP 7.7 Tray 2 Lift Motor

Parts List on PL 4.10 Item 11
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove Tray 2.
2. Remove the Duplex Unit, REP 10.1.
3. Remove the IP Board Cover, REP
4. Remove the Right Cover, REP 28.2.
5. Remove the MCU Board, REP 3.4.
6. Disconnect P/J49 from the Tray 2 Lift Motor.
7. Remove 3 screws (long, metal) that secure the assembly to the chassis,
Figure 1 Remove the Tray 2 Lift Motor
Repairs
REP 7.7, REP 7.8
WARNING
28.1.
Figure

REP 7.8 Tray 2 Lift Gear

Parts List on PL 4.10 Item 12
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove Tray 2.
2. Remove the Duplex Unit,
3. Remove the IP Board Cover,
4. Remove the Right Cover,
5. Remove the MCU Board,
6. Remove the Tray 2 Lift Motor,
1. 7. Reach into the Tray 2 cavity and remove the gear,
5/2011
4-36
WARNING
REP 10.1.
REP 28.1.
REP 28.2.
REP 3.4.
REP 7.7.
Figure 1.
Figure 1 Remove the Tray 2 Lift Gear
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual