Virtual Router Redundancy Protocol (Vrrp); Ipv4 Vrrp Commands; Advertise-Interval - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Virtual Router Redundancy Protocol

Virtual router redundancy protocol (VRRP) is supported by the Dell Networking operating system.

IPv6 VRRP Commands

IPv4 VRRP Commands

The following are IPv4 VRRP commands.

Set the time interval between VRRP advertisements.

C9000 Series

advertise-interval {seconds | centisecs centisecs }

To return to the default settings, use the no advertise-interval command.

1 second or 100 centisecs.

Command Modes

INTERFACE-VRRP

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

Enter a number of seconds. The range is from 1 to 255. The

default is 1 second.

Enter the keyword centisecs followed by the number of

centisecs in multiple of 25 centisecs. The range is 25 to 4075

centisecs in multiples of 25 centisecs.

Virtual Router Redundancy Protocol (VRRP)

Table of Contents