Router Rip - Dell Force10 Z9000 Reference Manual

To disable redistribution, use the no redistribute ospf process-id [match
external {1 | 2} | match internal | metric metric-value]
[route-map map-name] command.
Parameters
process-id
match external {1
| 2}
match internal
metric
value
route-map
name
Defaults Not configured.
Command Modes

ROUTER RIP

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
router rip
Enter ROUTER RIP mode to configure and enable RIP.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax router rip
To disable RIP, use the no router rip command.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
1252
Enter a number that corresponds to the OSPF process ID to be
redistributed. The range is 1 to 65355.
(OPTIONAL) Enter the keywords match external followed by the
numbers 1 or 2 to indicated that external 1 routes or external 2 routes
should be redistributed.
(OPTIONAL) Enter the keywords match internal to indicate that
internal routes should be redistributed.
metric-
(OPTIONAL) Enter the keyword metric followed by a number as the
metric value. The range is 0 to 16.
map- (OPTIONAL) Enter the keywords route-map followed by the name
of a configured route map.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Introduced on the Z9000.
Introduced on the S4810.