Show Rmon - Dell Force10 Z9000 Reference Manual

falling-threshold
value event-
number
owner
Defaults owner
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0

show rmon

Display the RMON running status including the memory usage.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show rmon
Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0
Example
FTOS# show rmon
RMON status
1264
Enter the keywords falling-threshold followed by the value
(64 bit) the falling-threshold alarm is either triggered or reset. Then
enter the event-number to trigger when the falling threshold exceeds
its limit. This value is the same as the alarmFallingEventIndex or the
alarmTable of the RMON MIB. If there is no corresponding falling-
threshold event, the value is zero.
string
(OPTIONAL) Enter the keyword owner followed the owner name to
specify an owner for the alarm. This is the alarmOwner object in the
alarmTable of the RMON MIB.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
total memory used 218840 bytes.
ether statistics table: 8 entries, 4608 bytes
ether history table: 8 entries, 6000 bytes
alarm table: 390 entries, 102960 bytes