Ip Bgp Maximum-Paths - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp maximum-paths

ip bgp maximum-paths
Enables or disables support for multiple equal paths. When multipath support is enabled and the path
selection process determines that multiple paths are equal when the router-id is disregarded, then all equal
paths are installed in the hardware forwarding table. When multipath support is disabled, only the best
route entry is installed in the hardware forwarding table.
ip bgp maximum-paths
no ip bgp maximum-paths
Syntax Definitions
N/A
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to disable support for multiple equal cost paths.
•
The BGP protocol must be disabled (using the
command.
Examples
-> ip bgp maximum-paths
-> no ip bgp maximum-paths
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip bgp
MIB Objects
alaBgpGlobal
alaBgpMultiPath
page 19-26
ip bgp admin-state
Displays the current global settings for the local BGP speaker.
command) before using this
OmniSwitch CLI Reference Guide
BGP Commands
March 2011