Ip Bgp Neighbor Remote-As - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp neighbor remote-as

ip bgp neighbor remote-as
Assigns an AS number to this BGP peer.
ip bgp neighbor ip_address remote-as value
Syntax Definitions
ip_address
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
A BGP peer created with the
state enable) until it is assigned an autonomous system number. If the AS number matches the AS
number assigned to the local BGP speaker (assigned using the
the peer is considered internal to the local autonomous system. Otherwise, the peer is consider external
to the local BGP speaker's AS.
•
This BGP peer may not be operational within this router and it may be in an external AS, but it must
still be configured on this router before the local BGP speaker can establish a connection to the peer.
The local BGP speaker does not auto-discover peers in other routers; it initially learns about peers
through the peer commands.
•
The BGP peer is restarted after issuing this command.
Examples
-> ip bgp neighbor 172.22.2.115 remote-as 100
Release History
Release 7.1.1; command was introduced.
page 19-78
32-bit IP address of the BGP peer.
Autonomous system number in the range 1 - 65535.
default
1
ip bgp neighbor command cannot be enabled (ip bgp neighbor admin-
ip bgp autonomous-system
OmniSwitch CLI Reference Guide
BGP Commands
command),
March 2011