Ip Bgp Aggregate-Address Admin-State - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp aggregate-address admin-state

ip bgp aggregate-address admin-state
Enables or disables a BGP aggregate route.
ip bgp aggregate-address ip_address ip_mask admin-state {enable | disable}
Syntax Definitions
ip_address
ip_mask
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Configure all aggregate route parameters before enabling the aggregate with this command. Use the
bgp aggregate-address
•
The show ip bgp path
Examples
-> ip bgp aggregate-address 172.22.2.0 255.255.255.0 admin-state enable
-> ip bgp aggregate-address 172.22.2.0 255.255.255.0 admin-state disable
Release History
Release 7.1.1; command was introduced.
page 19-34
32-bit IP address for this aggregate route.
32-bit subnet mask that determines how many bits of the network
address denote the network number.
Enables this aggregate route.
Disables this aggregate route.
default
disable
command to configure individual aggregate parameters.
command displays every aggregate currently defined.
OmniSwitch CLI Reference Guide
BGP Commands
ip
March 2011