Ip Bgp Log-Neighbor-Changes - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ip bgp log-neighbor-changes

Enables or disables the logging of peer state changes. If enabled, this logging tracks changes in the state of
BGP peers from ESTABLISHED to IDLE and from IDLE to ESTABLISHED. Viewing peer state logging
requires that certain debug parameters be set.
ip bgp log-neighbor-changes
no ip bgp log-neighbor-changes
Syntax Definitions
N/A
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The BGP protocol must be disabled (using the
Examples
-> ip bgp log-neighbor-changes
-> no ip bgp log-neighbor-changes
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp admin-state
MIB Objects
alaBgpGlobal
alaBgpPeerChanges
OmniSwitch CLI Reference Guide
ip bgp admin-state
Disables BGP within the router.
March 2011
ip bgp log-neighbor-changes
command) before using this command.
page 19-27