Ip Bgp Confederation Identifier - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp confederation identifier

ip bgp confederation identifier
Sets a confederation identification value for the local BGP speaker (this router). A confederation is a
grouping of sub-ASs into a single AS. To peers outside a confederation, the confederation appears to be a
single AS. Within the confederation multiple ASs may exist and even exchange information with each
other as using external BGP (EBGP).
ip bgp confederation identifier value
Syntax Definitions
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to restore the default value.
•
A value of 0 means this local speaker is not a member of any confederation.
•
The BGP protocol must be disabled (using the
command.
•
Use this command in conjunction with the
peers that are a members of the same confederation as the local BGP speaker.
Examples
-> ip bgp confederation identifier 3
Release History
Release 7.1.1; command was introduced.
page 19-24
The confederation identification value. The valid range is 0–65535.
default
0
ip bgp admin-state
ip bgp confederation neighbor
command) before using this
command to specify those
OmniSwitch CLI Reference Guide
BGP Commands
March 2011