Ip Bgp Network Admin-State - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp network admin-state

ip bgp network admin-state
Enables or disables a BGP network.
ip bgp network network_address ip_mask admin-state {enable | disable}
Syntax Definitions
network_address
ip_mask
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Configure all network parameters before enabling this BGP network with this command. Use the
bgp network command to configure individual aggregate parameters.
•
You can create up 200 network entries. The
currently defined.
Examples
-> ip bgp network 172.22.2.115 255.255.255.0 admin-state enable
Release History
Release 7.1.1; command was introduced.
page 19-48
32-bit IP address.
32-bit subnet mask that determines how many bits of the network
address denote the network number.
Enables this network.
Disables this network.
default
disable
show ip bgp path command displays every network
OmniSwitch CLI Reference Guide
BGP Commands
ip
March 2011