Ip Bgp Aggregate-Address Community - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bgp aggregate-address community

ip bgp aggregate-address community
Defines a community for an aggregate route created by the ip bgp aggregate-address command. Commu-
nities are a way of grouping BGP peers that do not share an IP subnet or an AS number.
ip bgp aggregate-address ip_address ip_mask community string
Syntax Definitions
ip_address
ip_mask
string
Defaults
parameter
string
Platforms Supported
OmniSwitch 10K
Usage Guidelines
You can revert the aggregate community string to its default value by setting the community string to
"none". For example:
-> ip bgp aggregate-address 172.22.2.115 255.255.255.0 community none
Examples
-> ip bgp aggregate-address 172.22.2.115 255.255.255.0 community no-export
-> no ip bgp aggregate-address 172.22.2.115 255.255.255.0 community no-export
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp aggregate-address
page 19-38
32-bit IP address of the aggregate route.
32-bit subnet mask that determines how many bits of the IP address
denote the network number.
Community name, e.g., CommListAIn, ranging from 0 to 70 characters,
or a value of none. The Community name is case sensitive.
default
none
Creates and deletes a BGP aggregate route.
OmniSwitch CLI Reference Guide
BGP Commands
March 2011