Ip Bgp Neighbor Default-Originate - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ip bgp neighbor default-originate

Enables or disables BGP peer default origination.
ip bgp neighbor ip_address default-originate
no ip bgp neighbor ip_address default-originate
Syntax Definitions
ip_address
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to disable this feature.
•
When this command is enabled, the local BGP speaker advertises itself as a default to the peer. Such a
default route overrides any learned default (propagation) and outbound policy. The default route
0.0.0.0 does not need to exist on the local router.
Examples
-> ip bgp neighbor 172.22.2.115 default-originate
-> no ip bgp neighbor 172.22.2.115 default-originate
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp neighbor
MIB Objects
alaBgpPeerTable
alaBgpPeerAddr
alaBgpPeerDefaultOriginate
OmniSwitch CLI Reference Guide
32-bit IP address of the neighbor.
Creates or deletes a BGP peer.
March 2011
ip bgp neighbor default-originate
page 19-61