Ip Bgp As-Origin-Interval - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ip bgp as-origin-interval

Specifies the frequency at which routes local to the autonomous system are advertised. These advertise-
ments are also referred to as UPDATE messages. This interval applies to advertisements to internal peers.
ip bgp as-origin-interval seconds
no ip bgp as-origin-interval
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to reset the feature to the default value.
•
A lower value may increase the likelihood of route flapping as route status is updated more frequently.
Examples
-> ip bgp as-origin-interval 15
-> no ip bgp as-origin-interval
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp neighbor advertisement-
interval
MIB Objects
alaBgpGlobal
alaBgpAsOriginInterval
OmniSwitch CLI Reference Guide
The update interval in seconds. The valid range is 1–65535.
default
15
Set the route advertisement interval for external peers.
March 2011
ip bgp as-origin-interval
page 19-21