enable stpd auto-bind
Example
To automatically add ports to an STPD and expand the boundary of the STPD, you must complete the
following tasks:
• Create the carrier VLAN.
• Assign a VLANid to the carrier VLAN.
• Add ports to the carrier VLAN.
• Create an STPD (or use the default, S0).
• Enable autobind on the STPDs carrier VLAN.
• Configure the STPD tag (the StpdID must be identical to the VLANid of the carrier VLAN in the STP
domain).
• Enable STP.
The following example enables autobind on an STPD named s8 after creating a carrier VLAN named v5:
create vlan v5
configure vlan v5 tag 100
configure vlan v5 add ports 1:1-1:20 tagged
create stpd s8
enable stpd s8 auto-bind v5
configure stpd s8 tag 100
enable stpd s8
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
525