Unconfigure Stpd - Extreme Networks ExtremeWare XOS Command Reference Manual

STP Commands

unconfigure stpd

unconfigure stpd {<stpd_name>}
Description
Restores default STP values to a particular STPD or all STPDs.
Syntax Description
stpd_name Specifies an STPD name on the switch.
Default
N/A.
Usage Guidelines
If you create an STPD with a unique name, the keyword is optional.
stpd
Use this command to restore default STP values to a particular STPD. If you want to restore default STP
values on all STPDs, do not specify a spanning tree name.
Example
The following command restores default values to an STPD named Backbone_st:
unconfigure stpd backbone_st
History
This command was available in ExtremeWare XOS 10.1.
534 ExtremeWare XOS 11.0 Command Reference Guide