Configure Bgp Peer-Group No-Dampening - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp peer-group no-dampening

configure bgp peer-group <peer-group-name> no-dampening
Description
Configures no route flap dampening for a BGP peer group (disables route flap dampening).
Syntax Description
peer-group-name Specifies a BGP peer group.
Default
This feature is disabled by default.
Usage Guidelines
Use the following command to enable route flap dampening for a BGP peer-group:
configure bgp peer-group <peer-group-name> {address-family [ipv4-unicast |
ipv4-multicast]} dampening {{half-life <half-life-minutes> {reuse-limit
<reuse-limit-number> supress-limit <suppress-limit-number> max-suppress
<max-suppress-minutes>}} | policy-filter [<policy-name> | none]}
Example
The following command disables route flap dampening to the BGP peer group outer:
configure bgp peer-group outer no-dampening
History
This command was available in ExtremeWare XOS 10.1.
818 ExtremeWare XOS 11.0 Command Reference Guide