Configure Pim Crp Timer - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Multicast Commands

configure pim crp timer

configure pim crp timer <crp_adv_interval>
Description
Configures the candidate rendezvous point advertising interval in PIM sparse mode operation.
Syntax Description
crp_adv_interval Specifies a candidate rendezvous point advertising interval in seconds.
Default
The default is 60 seconds.
Usage Guidelines
None.
Example
The following command configures the candidate rendezvous point advertising interval to 120 seconds:
configure pim crp timer 120
History
This command was available in ExtremeWare XOS 10.1.
896 ExtremeWare XOS 11.0 Command Reference Guide