IP Unicast Commands
configure iproute add
configure iproute add [<ipNetmask> | <ip_addr> <mask>] <gateway>
{multicast-only | unicast-only | vr <vrname>}
Description
Adds a static address to the routing table.
Syntax Description
ipNetmask
ip_address
mask
gateway
metric
vrname
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Use a value of 255.255.255.255 for mask to indicate a host entry.
Example
The following command adds a static address to the routing table:
configure iproute add 10.1.1.0/24 123.45.67.1 5
History
This command was available in ExtremeWare XOS 10.1.
616
Specifies an IP address/mask length.
Specifies an IP address.
Specifies a subnet mask.
Specifies a VLAN gateway.
Specifies a cost metric.
Specifies the virtual router to which the route is added.
ExtremeWare XOS 11.0 Command Reference Guide