Unconfigure Sflow Agent - Extreme Networks ExtremeWare XOS Command Reference Manual

unconfigure sflow agent

unconfigure sflow agent
unconfigure sflow agent
Description
Resets the sFlow agent's IP address to the default value.
Syntax Description
This command has no arguments or variables.
Default
The default IP address is 0.0.0.0.
Usage Guidelines
This command resets the sFlow agent IP address to its default value.
Example
The following command resets the source IP address to 0.0.0.0 for UDP datagrams sent out by the sFlow
agent:
unconfigure sflow agent
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide 405