EAPS Commands
configure eaps add protect vlan
configure eaps <name> add protect vlan <vlan_name>
Description
Adds the specified protected VLAN to the specified EAPS domain.
Syntax Description
name
vlan_name
Default
N/A.
Usage Guidelines
You must configure one or more protected VLANs for each EAPS domain. The protected VLANs are the
data-carrying VLANs.
A protected VLAN can be added to one or more EAPS domains.
When you configure the VLAN that will act as a protected VLAN, the ring ports of the protected VLAN
must be tagged (except in the case of the default VLAN). As long as the ring is complete, the master
node blocks the protected VLANs on its secondary port.
Example
The following command adds the protected VLAN "orchid" to the EAPS domain "eaps_1":
configure eaps eaps_1 add protect vlan orchid
History
This command was first available in ExtremeWare XOS 11.0.
472
Specifies the name of an EAPS domain.
Specifies the name of the protected VLAN.
ExtremeWare XOS 11.0 Command Reference Guide