Configure Esrp Ports Restart - Extreme Networks ExtremeWare XOS Command Reference Manual

ESRP Commands

configure esrp ports restart

configure esrp <esrpDomain> ports <ports> restart
Description
Configures ESRP to restart ports if there is a state change and the downstream switch is from another
vendor.
Syntax Description
esrpDomain
ports
Default
N/A.
Usage Guidelines
If an ESRP domain becomes a slave, ESRP disconnects member ports that have port restart enabled. The
disconnection of these ports causes downstream devices to remove the ports from their FDB tables.
After 3 seconds the ports re-establish connection with the ESRP-enabled device. This feature allows you
to use ESRP in networks that include equipment from other vendors.
If switch becomes a slave, ESRP disconnects the physical links of member ports that have port restart
enabled.
Example
The following command enables port restart for ports 7-9 on slot 3 on ESRP domain esrp1:
configure esrp esrp1 port 3:7-3:9 restart
History
This command was first available in ExtremeWare XOS 11.0.
564
Specifies the name of the ESRP domain.
Specifies a list of ports. May be in the form 2:*, 2:5, 2:6-2:8.
ExtremeWare XOS 11.0 Command Reference Guide