Configure Bgp Neighbor Shutdown-Priority - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp neighbor shutdown-priority

configure bgp neighbor [all | <remoteaddr>] shutdown-priority <number>
Description
Configures the shutdown priority for a BGP neighbor.
Syntax Description
remoteaddr
number
Default
The default value is 1024.
Usage Guidelines
Higher priority values lower the chance of a BGP neighbor to be automatically disabled in case BGP or
the system goes to a low memory condition.
Example
The following command configures the shutdown priority of the BGP neighbor 10.0.20.1 to 500:
configure bgp neighbor 10.0.20.1 shutdown-priority 1000
History
This command was available in ExtremeWare XOS 10.1.
808
Specifies an IP address of a BGP neighbor.
Specifies the shutdown priority. The range is 0 - 65,535.
ExtremeWare XOS 11.0 Command Reference Guide