Configure Telnet Port - Extreme Networks ExtremeWare XOS Command Reference Manual

configure telnet port

configure telnet port [<portno> | default]
Description
Configures the TCP port used by Telnet for communication.
Syntax Description
portno
default
Default
Port 23.
Usage Guidelines
You must be logged in as administrator to configure the Telnet port.
The
portno
Example
The following command changes the port used for Telnet to port 85:
configure telnet port 85
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a TCP port number. The default is 23. The range is 1 through
65535.
Specifies the default Telnet TCP port number. The default is 23.
range is 1 through 65535.
configure telnet port
117