Extreme Networks ExtremeWare XOS Command Reference Manual page 327

configure log target match
To see the current configuration of a filter, use the following command:
show log configuration filter {<filter name>}
Example
The following command sends log messages to the current session, that pass the current filter and
severity level, and contain the string user5:
configure log target session match user5
History
This command was first available in ExtremeWare XOS 10.1.
The and options were first available in ExtremeWare XOS 11.0.
primary-msm backup-msm
ExtremeWare XOS 11.0 Command Reference Guide 327