Configure Snmpv3 Delete Target-Params - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmpv3 delete target-params

configure snmpv3 delete target-params [{[[hex <hex_param_name>] |
<param_name>]} | all]
Description
Deletes SNMPv3 target parameters.
Syntax Description
hex_param_name
param_name
Default
N/A.
Usage Guidelines
Use this command to delete an entry in the SNMPv3 snmpTargetParamsTable. This table specifies the
message processing model, security level, security model, and the storage parameters for messages to
any target addresses associated with a particular parameter name.
Example
The following command deletes a target parameters entry named P1:
configure snmpv3 delete target-params P1
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_param_name
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the parameter name associated with the target. The value is to be
supplied as a colon separated string of hex octets.
Specifies the parameter name associated with the target in ASCII format.
parameter was added in ExtremeWare XOS 11.0.
configure snmpv3 delete target-params
111