Unconfigure Switch - Extreme Networks ExtremeWare XOS Command Reference Manual

Configuration and Image Commands

unconfigure switch

unconfigure switch {all}
Description
Returns the switch configuration to its factory default settings and reboots the switch.
Syntax Description
all
Default
N/A.
Usage Guidelines
Use
unconfigure switch
configuration. This preserves users account information, date and time settings, and so on.
Include the parameter
all
reboot using the last used image and factory default configuration.
Example
The following command erases the entire current configuration, resets to factory defaults, and reboots
the switch using the last specified saved image and factory default configuration:
unconfigure switch all
History
This command was first available in ExtremeWare XOS 10.1.
946
Specifies that the entire current configuration should be erased, and the switch
rebooted.
to reset the configuration to factory defaults, but without erasing the
to clear the entire current configuration, including all switch parameters, and
ExtremeWare XOS 11.0 Command Reference Guide