Extreme Networks ExtremeWare XOS Command Reference Manual page 215

The following command displays the connectivity and configuration of neighboring Extreme Networks
switches:
show edp ports 1:1 detail
Following is sample output from this command:
=============================================================================
Port 1:1: EDP is Enabled
Tx stats: sw-pdu-tx=2555
Rx stats: sw-pdu-rx=2511
Time of last transmit error: None
Time of last receive error:
Remote-System:
Remote-ID:
Software version:
Remote-Port:
Port Type:
Auto Negotiation:
Flow Control:
Duplex Speed:
Port Speed (MB):
Remote-Vlans:
test (4094)
=============================================================================
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
vlan-pdu-tx=1465
vlan-pdu-rx=2511
None
Oban
00:00:00:30:48:41:ed:97
11.0.0.19
1:1
Ethernet
OFF
SYMMETRIC/ASYMMETRIC
Configured = HALF
Configured = ERROR
Age = 41
pdu-tx-err=0
pdu-rx-err=0
Age = 41
Actual = HALF
Actual = 100 Mbps
show edp
215