Configure Vlan Ipaddress - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vlan ipaddress

configure vlan <vlan_name> ipaddress <ipaddress> {<netmask>}
Description
Assigns an IP address and an optional subnet mask to the VLAN.
Syntax Description
vlan_name
ipaddress
netmask
Default
N/A.
Usage Guidelines
The VLAN must already exists before you can assign an IP address: use the
create the VLAN.
NOTE
If you plan to use the VLAN as a control VLAN for an EAPS domain, do NOT configure the VLAN with
an IP address.
Example
The following commands are equivalent; both assign an IP address of 10.12.123.1 to a VLAN named
accounting:
configure vlan accounting ipaddress 10.12.123.1/24
configure vlan accounting ipaddress 10.12.123.1 255.255.255.0
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a VLAN name.
Specifies an IP address.
Specifies a subnet mask in dotted-quad notation (e.g. 255.255.255.0).
configure vlan ipaddress
command to
create vlan
237