Extreme Networks ExtremeWare XOS Command Reference Manual page 372

Commands for Status Monitoring and Statistics
Severity : Info (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Log Filter Name: DefaultFilter
I/
E Comp. Sub-comp.
- ------- ----------- ----------------------- --------
I All
Log Filter Name: myFilter
I/
E Comp. Sub-comp.
- ------- ----------- ----------------------- --------
I STP
Include/Exclude: I - Include,
Component Unreg: * - Component/Subcomponent is not currently registered
Severity Values: C - Critical,
Debug Severity : S - Debug-Summary,
+ - Debug Severities, but log debug-mode not enabled
If Match parameters present:
Parameter Flags: S - Source,
I - Ingress,
Parameter Types: Port - Physical Port list,
MAC
VID
L4
Nbr
Proc - Process Name
Strict Match : Y - every match parameter entered must be present in the event
N - match parameters need not be present in the event
History
This command was first available in ExtremeWare XOS 10.1.
372
Condition
Condition
E - Exclude
E - Error,
V - Debug-Verbose,
D - Destination, (as applicable)
E - Egress,
- MAC address, IP - IP Address/netmask,
- Virtual LAN ID (tag),
- Layer-4 Port #, Num
- Neighbor, Rtr - Routerid
Severity
CEWNISVD
--------
Severity
CEWNISVD
--------
W - Warning, N - Notice,
D - Debug-Data
B - BGP
Slot - Physical Slot #
Mask - Netmask
VLAN - Virtual LAN name
- Number, Str - String
I - Info
ExtremeWare XOS 11.0 Command Reference Guide