Enable Log Debug-Mode - Extreme Networks ExtremeWare XOS Command Reference Manual

enable log debug-mode

enable log debug-mode
enable log debug-mode
Description
Enables debug mode. The switch allows debug events included in log filters to be logged.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command enables debug mode. Debug mode must be enabled prior to logging debug messages,
which can severely degrade performance. For typical network device monitoring, debug mode should
remain disabled, the default setting. Debug mode should only be enabled when advised by technical
support, or when advanced diagnosis is required. The debug mode setting is saved to FLASH.
Example
The following command enables debug mode:
enable log debug-mode
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 353