Enable Rip Originate-Default Cost - Extreme Networks ExtremeWare XOS Command Reference Manual

enable rip originate-default cost

enable rip originate-default {always} cost <number> {tag<number>}
Description
Configures a default route to be advertised by RIP.
Syntax Description
always
cost <number>
tag <number>
Default
Disabled.
Usage Guidelines
If is specified, RIP always advertises the default route to its neighbors. If always is not specified,
always
RIP advertises a default route only if a reachable default route is in the system route table.
The default route advertisement is filtered using the out policy.
The cost metric is inserted for all RIP-learned, static, and direct routes injected into RIP. The tag value is
used only by special routing applications.
Example
The following command configures a default route to be advertised by RIP if there is a default route in
the system routing table:
enable rip originate-default cost 7
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies to always advertise the default route.
Specifies a cost metric. The range is 1 - 15.
Specifies a tag number.
enable rip originate-default cost
753