Enable Igmp Snooping With-Proxy - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Multicast Commands

enable igmp snooping with-proxy

enable igmp snooping with-proxy
Description
Enables the IGMP snooping proxy. The default setting is enabled.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Enabling the proxy allows the switch to suppress the duplicate join requests on a group to forward to
the connected layer 3 switch. The proxy also suppresses unnecessary IGMP leave messages so that they
are forwarded only when the last member leaves the group.
This command can be used for troubleshooting purpose. It should be enabled for normal network
operation. The command does not alter the snooping setting.
Example
The following command enables the IGMP snooping proxy:
enable igmp snooping with-proxy
History
This command was available in ExtremeWare XOS 10.1.
912 ExtremeWare XOS 11.0 Command Reference Guide