Configure Snmpv3 Delete Access - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmpv3 delete access

configure snmpv3 delete access [all-non-defaults | {[[hex <hex_group_name>]
| <group_name>] {sec-model [snmpv1 | snmpv2c | usm] sec-level [noauth |
authnopriv | priv]}}]
Description
Deletes access rights for a group.
Syntax Description
all-non-defaults
hex_group_name
group_name
sec-model
snmpv1
snmpv2c
usm
sec-level
noauth
authnopriv
priv
Default
The default values are:
• sec-model—USM
• sec-level—noauth
Usage Guidelines
Use this command to remove access rights for a group. Use the
all the security groups, except for the default groups. The default groups are: admin, initial, v1v2c_ro,
v1v2c_rw.
Deleting an access will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {[[hex <hex_group_name>] | <group_name>]} user
[all-non-defaults | {[[hex <hex_user_name>] | <user_name>] {sec-model
[snmpv1|snmpv2c|usm]}}]
Example
The following command deletes all entries with the group name userGroup:
configure snmpv3 delete access userGroup
ExtremeWare XOS 11.0 Command Reference Guide
Specifies that all non-default (non-permanent) security groups are to be
deleted.
Specifies the group name to be deleted. The value is to be supplies as a
colon separated string of hex octets.
Specifies the group name to be deleted in ASCII format.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
Specifies the security level for the group.
Specifies no authentication (and implies no privacy) for the security level.
Specifies authentication and no privacy for the security level.
Specifies authentication and privacy for the security level.
configure snmpv3 delete access
keyword to delete
all-non-defaults
101