Configure Bgp Neighbor Timer - Extreme Networks ExtremeWare XOS Command Reference Manual

configure bgp neighbor timer

configure bgp neighbor [<remoteaddr> | all] timer keep-alive <keepalive>
hold-time <holdtime>
Description
Configures the BGP neighbor timers.
Syntax Description
remoteaddr
all
keepalive
holdtime
Default
The default keepalive setting is 60 seconds. The default hold time is 180 seconds.
Usage Guidelines
The BGP neighbor must be disabled before changing the timer values.
Example
The following command configures the BGP neighbor timers:
configure bgp neighbor 192.168.1.5 timer keep-alive 120 hold-time 360
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies an IP address.
Specifies all neighbors.
Specifies a BGP neighbor timer keepalive time in seconds. The range is 0 to
21,845 seconds.
Specifies a BGP neighbor timer hold time in seconds. The range is 0 and
3 to 65,535 seconds.
configure bgp neighbor timer
811