Configure Vrrp Vlan Vrid Authentication - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vrrp vlan vrid authentication

configure vrrp vlan <vlan_name> vrid <vridval> authentication [none |
simplepassword <password>]
Description
Configures the authentication type for a specific VRRP virtual router.
Syntax Description
vlan_name
vridval
password
Default
Authentication is set to none.
Usage Guidelines
This command can add a modest amount of security to VRRP advertisements. All VRRP routers using
the same VRID must use the same password when using this feature.
A simple password must be between 1 and 8 characters long.
Example
The following command configures authentication for VRRP VLAN vrrp-1 with the password
configure vrrp vlan vrrp-1 vrid 1 authentication simple-password newvrrp
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of
1-255.
Specifies the user-defined password for authentication.
configure vrrp vlan vrid authentication
newvrrp
589
: