Configuration and Image Commands
show configuration
show configuration {<module-name>}
Description
Displays a configuration to the terminal.
Syntax Description
module-name
Specifies a module.
Usage Guidelines
If the output scrolls off the top of the screen, you can use the
command to pause the
enable clipaging
display when the output fills the screen. The default for clipaging is enabled.
You can just display the configuration of a module of interest by using the
keyword. For
module-name
example, some of the modules are AAA, ACL, BGP, EDP, FDB, SNMP, and VLAN. Use
[TAB]-completion to see a list.
Example
This command shows the current configuration active in the switch:
show configuration
History
This command was first available in ExtremeWare XOS 11.0.
942
ExtremeWare XOS 11.0 Command Reference Guide