unconfigure stpd ports link-type
unconfigure stpd <stpd_name> ports link-type <port_list>
Description
Returns the specified port to the factory default setting of broadcast link.
Syntax Description
stpd_name
port_list
Default
All ports are broadcast link types.
Usage Guidelines
If your STPD has the same name as another component, for example a VLAN, you must enter the
keyword to specify the STPD. If your STPD has a name unique only to that STPD, the keyword
optional.
If the switch operates in 802.1D mode, any configured port link type will behave the same as the
broadcast link type.
Example
The following command configures slot 2, ports 1 through 4 to return to the factory default of broadcast
links in STPD s1:
unconfigure stpd s1 ports link-type 2:1-2:4
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies an STPD name on the switch.
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
unconfigure stpd ports link-type
stpd
is
stpd
535