Configure Bgp Neighbor Weight - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp neighbor weight

configure bgp neighbor [<remoteaddr> | all] weight <weight>
Description
Assigns a locally-used weight to a neighbor connection for the route selection algorithm.
Syntax Description
remoteaddr
all
weight
Default
By default, the weight is 0.
Usage Guidelines
All routes learned from this peer are assigned the same weight. The route with the highest weight is
more preferable when multiple routes are available to the same network. The range is 0 to 65,535.
BGP selects routes based on the following precedence (from highest to lowest):
• higher weight
• higher local preference
• shortest length (shortest AS path)
• lowest origin code
• lowest MED
• route from external peer
• lowest cost to Next Hop
• lowest routerID
Example
The following command assigns a locally used weight of 10 to a neighbor connection:
configure bgp neighbor 192.168.1.5 weight 10
History
This command was available in ExtremeWare XOS 10.1.
812
Specifies an IP address of the BGP neighbor.
Specifies all neighbors.
Specifies a BGP neighbor weight.
ExtremeWare XOS 11.0 Command Reference Guide