Show Log Configuration - Extreme Networks ExtremeWare XOS Command Reference Manual

show log configuration

show log configuration
Description
Displays the log configuration for switch log settings, and for certain targets.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This command displays the log configuration for all targets. The state of the target, enabled or disabled
is displayed. For the enabled targets, the associated filter, severity, match expression, and format is
displayed. The debug mode state of the switch is also displayed.
Example
The following command displays the configuration of all the log targets:
show log configuration
The following is sample output from this command:
Debug-Mode: Enabled
Log Target
Enabled ?
Filter Name : DefaultFilter
Match regex : Any
Severity
Format
ion>
Buffer size : 1000 messages
Log Target
Enabled ?
Filter Name : DefaultFilter
Match regex : Any
Severity
Format
ion>
Log Target
Enabled ?
Filter Name : DefaultFilter
Match regex : Any
ExtremeWare XOS 11.0 Command Reference Guide
: memory-buffer
: yes
: Debug-Data (through Critical)
: MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
: nvram
: yes
: Warning (through Critical)
: MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
: console
: no
show log configuration
371