Enable Stpd Rapid-Root-Failover - Extreme Networks ExtremeWare XOS Command Reference Manual

enable stpd rapid-root-failover

enable stpd rapid-root-failover
enable stpd <stpd_name> rapid-root-failover
Description
Enables rapid root failover for faster STP recovery times.
Syntax Description
stpd_name Specifies an STPD name on the switch.
Default
Disabled.
Usage Guidelines
If you create an STPD with a unique name, the keyword is optional.
stpd
To view the status of rapid root failover on the switch, use the command. The
show stpd show stpd
command displays information about the STPD configuration on the switch including the
enable/disable state for rapid root failover.
Example
The following command enables rapid root fail over on STPD Backbone_st:
enable stpd backbone_st rapid-root-failover
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 527