Configure Vrrp Vlan Vrid Add Track-Iproute - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vrrp vlan vrid add track-iproute

configure vrrp vlan <vlan_name> vrid <vridval> add track-iproute
<ipaddress>/<masklength>
Description
Creates a tracking entry for the specified route. When this route becomes unreachable, this entry is
considered to be failing.
Syntax Description
vlan_name
vridval
ipaddress
masklength
Default
N/A.
Usage Guidelines
The route specified in this command may not exist in the IP routing table. When you create the entry
for a route, an immediate VRRP failover may occur.
Example
The following command enables IP route failure tracking for routes to the specified subnet:
configure vrrp vlan vlan-1 vrid 1 add track-iproute 3.1.0.0/24
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the name of a VRRP VLAN.
Specifies the virtual router ID of the target VRRP virtual router. Value can be
in the range of 1-255.
Specifies the prefix of the route to track.
Specifies the length of the route's prefix.
configure vrrp vlan vrid add track-iproute
585