Commands for Accessing the Switch
traceroute
traceroute [vr <vrid>} | <host>] {from <source IP address>} {ttl <number>}
{port <port number>} {icmp}
Description
Enables you to trace the routed path between the switch and a destination endstation.
Syntax Description
vr
vrid
host
from <source IP address>
ttl <number>
port <port number>
icmp
Default
N/A.
Usage Guidelines
Each router along the path is displayed.
Example
The following command enables the traceroute function to a destination of 123.45.67.8:
traceroute 123.45.67.8
History
This command was first available in ExtremeWare XOS 10.1.
70
Specifies a virtual router.
Specifies which virtual router.
Specifies the hostname or IP address of the destination endstation.
Uses the specified source address in the ICMP packet. If not specified, the
address of the transmitting interface is used.
Configures the switch to trace up to the time-to-live number of the switch.
Specifies the UDP port number.
Configures the switch to send ICMP echo messages to trace the routed path
between the switch and a destination endstation.
ExtremeWare XOS 11.0 Command Reference Guide