Configure Ospf Metric-Table - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospf metric-table

configure ospf metric-table 10M <cost_10m> 100M <cost_100m> 1G <cost_1g>
{10G <cost_10g>}
Description
Configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces, and optionally,
the 10 Gbps interface.
Syntax Description
cost
Default
• 10 Mbps—The default cost is 10.
• 100 Mbps—The default cost is 5.
• 1 Gbps—The default cost is 4.
• 10 Gbps—The default cost is 2.
Usage Guidelines
None.
Example
The following command configures the automatic interface costs for 10 Mbps,
100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the interface cost for the indicated interfaces.
configure ospf metric-table
709