configure sflow poll-interval
configure sflow poll-interval <seconds>
Description
Configures the sFlow counter polling interval.
Syntax Description
seconds
Default
The default polling interval is 20 seconds.
Usage Guidelines
Each sFlow statistics counter is polled at regular intervals, and this data is then sent to the sFlow
collector. This command is used to set the polling interval. The polling interval applies to each counter
separately, and the polling is distributed among the counters. For example, if the polling interval is 20
seconds and there are twenty counters, data is collected successively every second.
Specifying a poll interval of 0 (zero) seconds disables polling.
Example
The following command sets the polling interval to 60 seconds:
configure sflow poll-interval 60
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the number of seconds between polling each counter. The value can
range from 0 to 3600 seconds.
configure sflow poll-interval
333