Disable Dot1P Replacement Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

disable dot1p replacement ports

disable dot1p replacement ports [<port_list> | all]
Description
Disables the ability to overwrite 802.1p priority values for a given set of ports.
Syntax Description
port_list
all
Default
N/A.
Usage Guidelines
The dot1p replacement feature is disabled by default.
Example
The following command disables 802.1p value replacement on all ports:
disable dot1p replacement ports all
History
This command was available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a list of slots and ports to which the parameters apply. May be in the
form 3-5, 2:5, 2:6-2:8.
Specifies that 802.1p replacement should be disabled for all ports.
disable dot1p replacement ports
295